Kawasaki FJ220D

Kawasaki FJ220DThe Kawasaki FJ220D is a 0.22 l (220 cc, 13.4 cu-in) single-cylinder air-cooled 4-stroke internal combustion small gasoline engine with horizontal shaft manufactured by Kawasaki Heavy Industries LTd., for general-purpose applications.

The FJ220D engine has an OHV (overhead valve) design; spherical combustion chamber; cast iron cylinder liner; dual ball bearing main journals; K-Twin balancer; float type carburetor with fixed main jet; CDI ignition system; mechanical governor and recoil starter with an automatic compression release. The engine uses a dual-element air filter.

Bore and stroke are 72.0 mm (2.83 in) and 54.0 mm (2.13 in), respectively. Compression ratio rating is 8.3:1. The Kawasaki FJ220D motor produced 6.5 PS (4.8 kW; 6.5 HP) at 3,600 rpm of maximum horsepower and 13.3 Nm (1.4 kg·m; 9.8 ft·lb) at 2,400 rpm of torque.

General information

Engine Specifications
ModelFJ220D
Type4-stroke, OHV, single cylinder
Displacement220 cm 3 (13.43 cu-in)
Max. horsepower6.5 PS (4.8 KW; 6.5 HP) at 3,600 rpm
Max. torque (crank PTO)13.3 Nm (1.4 kg·m; 9.8 ft·lb) at 2,400 rpm
CarburetorFloat type with fixed main jet
Cooling systemForced-air
Ignition systemCDI
Lubricating systemSplash
Starting systemRecoil starter
Stoping systemIgnition primary circuit ground
Fuel usedUnleaded gasoline (octane number 86 or higher)
Fuel tank capacity3.2 L
Fuel consumption298 g/HPh
PTO shaft rotationCounterclockwise (from PTO shaft side)

Dimensions and Weight

Kawasaki FJ220D
Length314 mm (12.4 in)
Width365 mm (14.4 in)
Height370 mm (14.6 in)
Dry weight17.5 kg (38.6 lbs)

Service Information

Engine
Maximum speed4,000 ± 100 rpm
Idle speed1,600 ± 150 rpm
Cylinder compression3.0 kg/cm2 (42 psi) at 600 rpm
Valve clearance
Intake valve clearance0.12 mm (0.0047 in)
Exhaust valve clearance0.12 mm (0.0047 in)
Oil system
Oil type4-stroke or an equivalent (SF, SG, SH, or SJ)
Recommended oilSAE 10W-30
Oil capacity0.6 L
Ignition system
Spark plugNGK: BPR5ES
Spark plug gap0.7-0.8 mm (0.028-0.031 in)
Ignition coil air gap0.3 mm (0.012 in)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists or spare parts catalogs. We are an information portal and provide the technical specifications of gasoline and diesel engines.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. We do not provide advice on technical issues related to the engines operation or repair. We do not recommend using provided information for engines repairing engines or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*