Jinlang 1P65QML-3

Jinlang 1P65QML-3The Jinlang 1P65QML-3 is a 0.2 l (199.1 cc, 12.15 cu-in) single cylinder, 4-stroke, forced air-cooled / oil-cooled internal combustion motorcycle engine, manufactured by Zhejiang Jinlang Power Co. LTD.

A 65 mm (2.56 in) cylinder bore and 60 mm (2.36 in) piston stroke give the motor a total of 199.1 cc (12.15 cu-in) of displacement, compression ratio rating is 9.7:1. The Jinlang 1P65QML-3 produced 13.2 PS (9.7 kW; 13.0 HP) at 7,250 rpm of maximum horsepower and 13.8 Nm (1.4 kg·m; 10.2 ft·lb) at 6,000 rpm of torque. Minimal idling speed 1,700 rpm.

General information

Engine Specifications
ModelJinlang 1P65QML-3
TypeFour-stroke, single cylinder
Displacement199.1 cc (12.15 cu-in)
Max. horsepower13.2 PS (9.7 KW; 13.0 HP) at 7,250 rpm
Max. torque (crank PTO)13.8 Nm (1.4 kg·m; 10.2 ft·lb) at 6,000 rpm
Cooling systemForced-air
Ignition systemCapacitance discharge ignition (CDI)
Lubricating systemSplash
Starting systemKick
Fuel usedUnleaded gasoline (octane number 86 or higher)

Dimensions and Weight

JL 1P65QML-3
Length, mm (in)
Width, mm (in)
Height, mm (in)
Dry weight, kg (lb)
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists or spare parts catalogs. We are an information portal and provide the technical specifications of gasoline and diesel engines.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. We do not provide advice on technical issues related to the engines operation or repair. We do not recommend using provided information for engines repairing engines or spare parts ordering, use only official service manuals and spare-parts catalogs.


  1. Hello! this motor is of interest, in the first batch of 30 motors, with subsequent purchase we will increase the volume to 100 motors, what price can we expect from you ordering this amount of motor.
    We need motors for the production of snowmobiles in Russia. Do you have any contact details to discuss our further commercial cooperation.

Leave a Reply

Your email address will not be published.