Kawasaki FE250

The Kawasaki FE250 is a 0.25 l (249 cc, 15.19 cu-in) single-cylinder air-cooled 4-stroke internal combustion small gasoline engine with horizontal shaft manufactured by Kawasaki Heavy Industries LTd., for general-purpose applications.

The FE250 engine has an OHV (overhead valve) design; cast iron cylinder liner; reciprocating balancer; float type carburetor with fixed main jet; flywheel magneto transistor type ignition system; mechanical governor and recoil starter with automatic compression release (electric starter was available as an option). The engine uses dual-element air cleaner or oil bath type air cleaner as an option.

A 76.0 mm (2.99 in) cylinder bore and 55.0 mm (2.17 in) piston stroke give the motor a total of 249 cc of displacement. Compression ratio rating is 8.4:1. The Kawasaki FE250 motor produced 8.2 PS (6.0 kW; 8.0 HP) at 3,600 rpm of horsepower and 16.5 Nm (1.68 kg·m; 12.18 ft·lb) at 2,800 rpm of torque. The FE250G – 1/2 cam gear reduction.

General information

Engine Specifications
Model	FE250D / FE250G
Type	4-stroke, OHV, single cylinder
Displacement	249 cm 3 (15.2 cu-in)
Max. horsepower	8.2 PS (6.0 KW; 8.0 HP) at 3,600 rpm
Max. torque (crank PTO)	16.5 Nm (1.68 kg·m; 12.18 ft·lb) ta 2,800 rpm
Carburetor	Float type with fixed main jet
Cooling system	Forced-air
Ignition system	Flywheel magneto transistor type
Lubricating system	Splash with low oil shut-off system
Starting system	Recoil or electric starter
Stoping system	Ignition primary circuit ground
Fuel used	Unleaded gasoline (octane number 86 or higher)
Fuel tank capacity	5.3 L (5.6 US qt)
Fuel consumption	240 g/HPh
PTO shaft rotation	Counterclockwise (from PTO shaft side)

Dimensions and Weight

	Kawasaki FE250 D/G
Length	344 mm (13.6 in)
Width	395 mm (15.5 in)
Height	432 mm (17.0 in)
Dry weight	26.8 kg (59.1 lbs)

Tightening torque specs

Tightening torque specs
Connecting rod bolt	20 Nm; 2.0 kg·m; 15 ft·lb
Cylinder head bolt	25 Nm; 2.5 kg·m; 17 ft·lb
Flywheel nut	86 Nm; 8.8 kg·m; 63 ft·lb
Rocker arm lock nut	7 Nm; 0.7 kg·m; 6 ft·lb
Crankcase cover	22 Nm; 2.2 kg·m; 16 ft·lb
Oil drain plug	32 Nm; 3.3 kg·m; 24 ft·lb
Spark plug	23 Nm; 2.3 kg·m; 17 ft·lb

Service Information

Engine
Maximum speed	4,000 ± 100 rpm
Idle speed	1,300 ± 150 rpm
Cylinder compression	3.0-4.0 kg/cm2 (42-57 psi) at 600 rpm
Valve clearance
Intake valve clearance	0.12 mm (0.0047 in)
Exhaust valve clearance	0.12 mm (0.0047 in)
Oil system
Oil type	4-stroke or an equivalent (SF, SG, SH, or SJ)
Recommended oil	SAE 10W-30
Oil capacity	1.1 L (1.2 US. qt)
Ignition system
Spark plug	NGK: BP5ES
Spark plug gap	0.7-0.8 mm (0.028-0.031 in)
Ignition coil air gap	0.3 mm (0.012 in)