The Caterpillar C1.6 is a 1.6 L (1,508 cc) four-cylinders water-cooled four-stroke internal combustion diesel engine manufactured by Caterpillar Inc., for industrial applications.
The Caterpillar C1.6 engine has a cast-iron cylinder block, indirect injection fuel system, electric starter motor and 12 Volts alternator. The Cat C1.6 engine used a belt-driven coolant pump, coolant temperature switch. This diesel motor uses closed-circuit lubrication system with spin-on lube oil filter, lube oil pressure switch, and lube oil sump.
It has a 77.0 mm (3.03 in) cylinder bore and 81.0 mm (3.19 in) piston stroke. Compression ratio rating is 22.9:1.
The CAT C1.6 engine produced:
- EU Stage IIIA emission standards: From 33.5 PS (24.6 KW; 33 HP) at 2,800 rpm to 36 PS (26.5 KW; 35.5 HP) at 3,000 rpm of maximum output power and 84.6 Nm (8.63 kg·m; 62.43 ft·lb) at 2,800 rpm of torque.
- U.S. EPA Tier 4 Interim emission standards: From 33.5 PS (24.6 KW; 33 HP) at 2,800 rpm to 36 PS (26.5 KW; 35.5 HP) at 3,000 rpm of power.
General information
| Engine Specifications | |
| Model | C1.6 |
| Type | 4-stroke, four-cylinders |
| Displacement | 1.6 L, 1,508 cm2, (92 cu·in) |
| Max. horsepower |
EU Stage IIIA emission standards: From 33.5 PS (24.6 KW; 33 HP) at 2,800 rpm to 36 PS (26.5 KW; 35.5 HP) at 3,000 rpm U.S. EPA Tier 4 Interim emission standards: From 33.5 PS (24.6 KW; 33 HP) at 2,800 rpm to 36 PS (26.5 KW; 35.5 HP) at 3,000 rpm |
| Torque (crank PTO) |
Naturally aspirated EU Stage IIIA emission standards: 84.6 Nm (8.63 kg·m; 62.43 ft·lb) at 2,800 rpm |
| Fuel system | Fuel injection pump with Electronic Shut-off Solenoid (ESOS) |
| Cooling system | Liquid-cooled |
| Aspiration type | Naturally Aspirated or Turbocharged |
| Lubricating system | Pressure feed |
| Starting system | Electric starter |
| Starting aid | Glow plug |
| PTO shaft rotation | Counterclockwise (from flywheel end) |
Dimensions and Weight
| C1.6 | |
| Length, mm (in) | 591 (23.3) |
| Width, mm (in) | 420 (16.5) |
| Height, mm (in) | 576 (22.7) |
| Dry weight, kg (lb) | 106.8 (235.5) |
MAINTENANCE DATA
| Engine | |
| Rated speed | 2,800-3,000 rpm |
| Oil system | |
| Oil type | 4-stroke engile oil or an equivalent |
| Recommended oil | SAE 10W-30 |
| Oil capacity | 6.5 L (6.9 U.S. qts) |
looking for c1.6 replacement head
looking for C1.6 replacement head