Kama KM290FE

Kama KM290FEThe Kama KM186FAS/E is a 954 cc (58.22 cu.in.) double-cylinder air-coolled 4-stroke direct injection diesel engine with horizontal shaft manufactured by WUXI WORLDBEST KAMA POWER CO., LTD.

The Kama KM290FE engine has OHV design, single-cylinder, direct injection system, and electric starter.

The KM290FE engine cylinder bore is 90.0 mm (3.54 in) and piston stroke is 75.0 mm (2.95 in). The compression ratio rating is 19:1. The engine produced from 18.3 HP (13.5 kW) at 3,000 rpm up to 19.0 HP (14 kW) at 3,600 rpm of maximum horsepower.

General information

Engine Specifications
Type4-stroke, single cylinder, diesel engine
Displacement954 cc (58.22 cu.in.)
Max. horsepower19.0 HP (14 kW) at 3,600 rpm
Max. torque
Cooling systemForced-air
Lubricating systemPressure spray compound
Starting systemRecoil or electric starter
Fuel usedLight diesel oil
Fuel tank capacity7.0 Liters

Dimensions and Weight

Length, mm (in)633 (24.92)
Width, mm (in)559 (22.0)
Height, mm (in)600 (23.62)
Weight, kg (lb)78.0 (172.0)

Maintenance data

Engine speed3,000-3,600 rpm
Valve clearance (cold state)0.10-0.15 mm (0.0039-0.0059 in)
Oil system
Oil typeOil for 4-stroke engines (above CC grade)
Recommended oilSAE 10W-30
Oil capacity3.15 l (0.70 gal.)
Fuel system
Injection pressure200 kg/cm2 (19.6 MPa)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists or spare parts catalogs. We are an information portal and provide the technical specifications of gasoline and diesel engines.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. We do not provide advice on technical issues related to the engines operation or repair. We do not recommend using provided information for engines repairing engines or spare parts ordering, use only official service manuals and spare-parts catalogs.


Leave a Reply

Your email address will not be published.