Rato CG250 (RW167FMM)

Rato CG250 (RW167FMM)The Rato CG250 (RW167FMM) is a 229.2 ml (13.9 cu-in) single-cylinder air-cooled 4-stroke internal combustion vertical motorcycle engine from Rato CG-series, manufactured by Chongqing RATO Holding (Group) CO., LTD.

The Rato CG250 engine uses rocker arm of cast iron and tappet of aluminum alloy; capacitance discharge ignition system and electric or kick start. The engine is equipped with a 5-speed gearbox.

The engine cylinder bore is 67 mm (2.64 in) and piston stroke is 65 mm (2.56 in). The CG250 (RW167FMM) produced 14.7 PS (10.8 kW; 14.5 HP) at 6,500 rpm of maximum horsepower and 16.5 N·m (1.68 kg·m, 12.17 ft·lb) at 5,500 rpm of torque.

General information

Engine Specifications
ModelCG250 (RW167FMM)
TypeVertical, four-stroke, single cylinder
Displacement229.2 ml (13.9 cu-in)
Max. horsepower14.7 PS (10.8 kW; 14.5 HP) at 6,500 rpm
Max. torque (crank PTO)16.5 N·m (1.68 kg·m, 12.17 ft·lb) at 5,500 rpm
Clutch methodManual wet multi-plate
Gearshift method5-speed gearshift
Cooling systemForced-air
Ignition systemCapacitance discharge ignition (CDI)
Lubricating systemSplash
Starting systemElectric / kick
Fuel usedUnleaded gasoline (octane number 86 or higher)
Fuel consumption354 g/kw·h

Dimensions and Weight

Rato CG250 (RW167FMM)
Length, mm (in)358 (14.09)
Width, mm (in)320 (12.6)
Height, mm (in)425 (16.7)
Dry weight, kg (lb)33 (2.7)

Service Information

Oil system
Oil capacity1.0 L
Ignition system
Spark plugD8RTC
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists or spare parts catalogs. We are an information portal and provide the technical specifications of gasoline and diesel engines.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. We do not provide advice on technical issues related to the engines operation or repair. We do not recommend using provided information for engines repairing engines or spare parts ordering, use only official service manuals and spare-parts catalogs.


    • This engine is used on the Janus Motorcycles and can achieve around 70 mph if you use the same sprockets front and rear (and assuming the bike frame is about the same weight, a heavier/lighter framed vehicle will affect performance. I’m 275 lbs, a lighter individual may be able to achieve a higher speed.

Leave a Reply

Your email address will not be published.